Airborne Electronic Isolated AC-DC Power Supply & Filter – AeroQor®
The AeroQor Isolated AC-DC Power Supply is a high efficiency, active PFC designed to be used as a COTS component in airborne applications. It operates from a universal or 115 Vrms AC input and generates an isolated DC output. Regulated output and droop output modules are available. Used in conjunction with a hold-up capacitor, and SynQor’s AC line filter, the AeroQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase or 3-Phase AC input. The module is supplied completely encased to provide protection from the harsh environments seen in many industrial areas. The module is designed with a high level of documentation and traceability, ideal for the aviation industry.
Product Features
Single-Phase Isolated Power Factor Correction Module
- Isolated output, 100W, 325W, 600W and 800W output power
- Universal input frequency range: 47 – 63Hz / 360 – 800Hz
- Input voltage range: 85-264Vrms
- ≥0.99 Power Factor
- High efficiency: 92% (230Vrms)
- -40°C to +100°C Operating Temperature
- Internal inrush current limit
- Auxiliary 10V bias supply, primary-side referenced
- Can be paralleled (droop version only)
- Compatible with SynQor’s AeroQor AC line filters
Single-Phase AC Line Filter Modules
- 85 to 264 Vrms
- Very low series resistance
- High Differential & Common-mode Attenuation
- All capacitors are safety-rated X7R multi-layer ceramic
- Meets common EMC standards in properly designed system with SynQor APFIC modules.
- -40°C to +100°C Operating Temperature
- Low power dissipation
3-Phase Isolated Power Factor Correction Module
- Compatible with commercial aircraft 60 Hz, 400 Hz and variable frequency systems
- Harmonic content meets commercial aircraft standards
- Minimal inrush current
- Balanced phase currents
- High power factor (0.99 at 400 Hz / 750 W)
- Minimal external output capacitance requirement
- Full load current during startup
- Ability to meet full EMI with available additional EMI filters
- N * 750 W power levels when paralleled
- 100°C max baseplate temperature at full power
- -40°C to +100°C Operating Temperature
3-Phase AC Line Filter Modules
- 85 to 264 Vrms
- Very low series resistance
- High Differential & Common-mode Attenuation
- All capacitors are safety-rated X7R multi-layer ceramic
- Meets common EMC standards in properly designed system with SynQor APFIC modules
- -40°C to +100°C Operating Temperature
- Low power dissipation
Contact a SynQor Power Specialist for more information now
Our specialists are experts in SynQor products. They’re here to answer all your questions and ensure you get exactly what you need.