PFCQor Modules

Essential building block of an AC-DC power supply

PFCQor The PFCQor Power Factor Correction module is an essential building block of an AC-DC power supply.  Used in conjunction with a hold-up capacitor, SynQor's high efficiency DC-DC converters and SynQor's AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF > 0.99) from a single phase AC input.
Product Links
Product Matrix
Part Numbering
Encased
Half Brick Quarter Brick
PFCQor Encased Mechanical Drawing PFCQor Encased Mechanical Drawing
 NOTES
   1) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
   2) Baseplate flatness tolerance is 0.004" (.10 mm) TIR for surface.
   3) Pins 1-3, 5-7, A, B and C are 0.040" (1.02mm) diameter, with 0.080" (2.03mm) diameter standoff shoulders.
   4) Pins 5 and 9 are 0.080" (2.03 mm) diameter with 0.125" (3.18 mm) diameter standoff shoulders.
   5) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel plate
   6) Undimensioned components are shown for visual reference only.
   7) Weight: 4.9 oz (139 g)
   8) Threaded and Non-Threaded options available
   9) All dimensions in inches (mm).
       Tolerances:
         x.xx +/-0.02 in. (x.x +/-0.5mm)
         x.xxx +/-0.010 in. (x.xx +/-0.25mm)
         unless otherwise noted.
  10) Workmanship: Meets or exceeds IPC-A-610C Class II
 
Flanged
Half Brick Quarter Brick
PFCQor Flanged Mechanical Drawing PFCQor Flanged Mechanical Drawing
 
 NOTES
   1) Applied torque per screw should not exceed 5in-lb (3in-lb recommended).
   2) Baseplate flatness tolerance is 0.001" (.2 mm) TIR for surface.
   3) Pins 1-4, 6-8, A, B and C are 0.040" (1.02mm) diameter, with 0.080" (2.03mm) diameter standoff shoulders.
   4) Pins 5 and 9 are 0.080" (2.03 mm) diameter with 0.125" (3.18 mm) diameter standoff shoulders.
   5) Other Pin extension lengths available
   6) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel plate
   7) Undimensioned components are shown for visual reference only.
   8) Weight: TBD
   9) All dimensions in inches (mm).
       Tolerances:
         x.xx +/-0.02 in. (x.x +/-0.5mm)
         x.xxx +/-0.010 in. (x.xx +/-0.25mm)
         unless otherwise noted.
  10) Workmanship: Meets or exceeds IPC-A-610C Class II