NiQor Non-Isolated DC-DC Converters
    Delivers up to 16 Amps of output current with minimal derating - no heatsink required
NiQor Series Non-Isolated DC-DC Converters The NiQor® DC-DC converter is a non-isolated buck regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. The NiQor family of converters are used predominately in DPA systems using a front end DC-DC high power brick (48Vin to low voltage bus). The non-isolated NiQor converters are then used at the point of load to create the low voltage outputs required by the design. The wide trim module can be programmed to a variety of output voltages through the use of a single external resistor.
Product Links
Back to Product matrix and Hightlights
Package Dimension Drawings
 
NiQor Base Part Number Features
Product Family Input Voltage Output Voltage Package
Size
Performance
Series
Thermal
Design
Maximum
Output
Current
Pos./Neg.
Logic
Pin Length Features
NQ: NiQor
(non-isolated)
04: 3.0-6.0V
10: 10.2-13.2V
15: 6.0-15V
16: 6.0-16V
W50: 0.75-5.0V
W33: 0.75-3.6V
T33: 0.85-3.6V
V: Vertical SIP
H: Horiz. SIP
S: Surface Mount
K: Kilo
M: Mega
G: Giga
A: Open Frame 07: 7.0 Amps
10: 10 Amps
15: 15 Amps
16: 16 Amps
30: 30 Amps
N: Neg
O: Neg. / Open
P: Positive / Open
R: 0.160" SIP Std.
V: 0.160" Rev. Vert. 
S: SMT Std.
N: None
S: Sense
D: Sense & Share
G: Sense, Share
     & Gnd Pins
Part Numbering Example: NQ04W33SMA16PSS
NOTE:  Not all combinations make valid part numbers. Please consult the factory for specific product availability.