MultiQor Plate Configurable Power Assemblies
    Customer Customizable Multi-Output DC-DC Power Supplies...
MTQ The MultiQor Plate power supply is designed to meet MIL-STD-704, MIL-STD-1275, DEF-STAN 61-5 and MIL-STD-461 when using Military COTS converters for 28Vin system and continuous full power operation is only needed down to 16Vin*. Total output power is 1200W* with typical efficiency up to 95%. Operational features include optional internal EMI filter with ceramic stabilizing bulk capacitor, spike and surge protection, high efficiency reverse polarity protection, no minimum load requirements and soft-start of all outputs. Several optional features are available including cabling accessories (click here).

* MultiQor DC28 configuration only.
  Product Links
Product Part Numbering Convention
Package Dimension Drawings
Model Total
Output
Power
Configuration Package Size     Weight    
 
(Also available with cover)
MTQ-Px-DC28T
(18V-40Vin with Transient Supression EMI input filter)
450W Up to 4 customer defined outputs P1/P2: 3.80"x6.80"x0.92" 1.02 lb - 1.40 lb*
P3/P4: 6.70"x6.84"x0.92" 2.06 lb - 2.36 lb*
  MTQ-Px-DC28
(16V-40Vin with no input filter)
1200W One customer defined output (with up to 3 converters in parallel) P1/P2: 3.80"x6.80"x0.92" 1.30 lb - 1.60 lb*
P3: 6.70"x6.84"x0.92" 2.50 lb
* weights vary depending on converters
 
Product Features
   Control    Protection
  • System On/Off control (isolated)
  • Individual output voltage Inhibit control (isolated)+
  • Remote Sense for each output voltage
  • Output voltage trim (-20%, +10%) for each output
  • Input Good signal (isolated)
  • Input under-voltage lockout
  • Output current limit and short circuit protection
  • Output over-voltage protection
  • Thermal shutdown
  • Automatic restart for all of the above
  • Active back bias current limit
Optional
  • Remote Sense Jumpers
  • Output current sharing
  • Internal input fuse
  • Cover++
 +  Individual control on DC28T models  
 ++ Cover optional on DC28T models only