Isolated PFCQor Modules

Essential building block of an AC-DC power supply

MPFICQor The MPFICQor Military Isolated PFC module is a high power, hige efficiency AC-DC converter  It operates from a universal AC input and generates an isolated and regulated output.   Used in conjuction with a hold-up capacitor, and SynQor's MCOTS AC line filter, the MPFICQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input.   The module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation environments.
Product Links
Product Matrix
Part Numbering
Encased
 
MPFICQor Encased Mechanical Drawing
 NOTES
   1) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
   2) Baseplate flatness tolerance is 0.004" (.10 mm) TIR for surface.
   3) Pins 1 and 2 or 0.065" (1.57mm) diameter with 0.100" (2.4mm) diameter standoff shoulder
   4) Pins 3-10 are 0.040" (1.02 mm) diameter with 0.080" (2.03 mm) diameter standoff shoulders.
   5) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel plate
   6) Undimensioned components are shown for visual reference only.
   7) Weight: TBD
   8) Threaded and Non-Threaded options available
   9) All dimensions in inches (mm).
       Tolerances:
         x.xx +/-0.02 in. (x.x +/-0.5mm)
         x.xxx +/-0.010 in. (x.xx +/-0.25mm)
         unless otherwise noted.
  10) Workmanship: Meets or exceeds IPC-A-610C Class II
 
Flanged
MPFICQor Flanged Mechanical Drawing
 
 NOTES
   1) Applied torque per screw should not exceed 5in-lb (3in-lb recommended).
   2) Baseplate flatness tolerance is 0.001" (.2 mm) TIR for surface.
   3) Pins 1 and 2 or 0.065" (1.57mm) diameter with 0.100" (2.4mm) diameter standoff shoulder
   4) Pins 3-10 are 0.040" (1.02 mm) diameter with 0.080" (2.03 mm) diameter standoff shoulders.
   5) Other Pin extension lengths available
   6) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel plate
   7) Undimensioned components are shown for visual reference only.
   8) Weight: TBD
   9) All dimensions in inches (mm).
       Tolerances:
         x.xx +/-0.02 in. (x.x +/-0.5mm)
         x.xxx +/-0.010 in. (x.xx +/-0.25mm)
         unless otherwise noted.
  10) Workmanship: Meets or exceeds IPC-A-610C Class II